Network Interfaces

Adtran
ALRS ISDN Router




T1 CSU ACE
Compact T1 Network Facility Interface

 

The ADTRAN(R) T1 CSU ACE is a compact, full-featured T1 channel service unit used to connect T1 data terminal equipment (DTE) and T1 facilities. The unit is designed to provide alarms, loopbacks, signal regeneration, line build out, and surge protection, as well as maintain 1s density for the DTE and T1 network.

The compact T1 CSU ACE is suitable for wallmounting or desktop use. Four LEDs on the front of the unit (POWER, LOOPBACK, EQUIPMENT LOS and NETWORK LOS) display the status of the unit. Above the LEDs, five small switches provide settings for customer premises equipment and network line build-out (LBO) distances. A small switch located on the unit's faceplate enables manual loopback operation. The three switches allotted for the equipment LBO offer five combination settings for PBX termination at distances up to 655 feet. The two network LBO switches provide four combination settings from 0 to 22.5 dBs in 7.5 increments.

ATLAS 550
Enterprise Integrated Access Device

(Requires Adobe Acrobat)

The Adtran Atlas 550 functions as a multi-T1 IAD, 1/0 DACS, ISDN switch, IP router, and Frame Relay concentrator/switch. Switchboard supports circuit switching applications such as intelligent call routing, overbooking and least-cost routing.

Includes Frame Relay and IP routing software. 6-slot modular platform, two network interface slots (one T1/PRI module included with chassis), four user modules, Hot swappable modules. Ability to migrate to additional packet technologies, such as ATM and Voice over IP.

Adtran NT1 ACE

Features Include:
  • Terminates ISDN Basic Rate 2-wire U Interface into S/T Interfaces

  • Supports multiple switch vendors including Lucent, NEC, Nortel, and Siemens

  • Video-conferencing applications

  • Terminates one BRI into two S/T Interfaces

  • AC and 48 VDC cables included

Adtran NT1 ACE3

Features Include:
  • Terminates ISDN Basic Rate 2-wire U Interface into S/T Interfaces

  • Supports multiple switch vendors including Lucent, NEC, Nortel, and Siemens

  • Video-conferencing applications

  • Terminates three BRI lines into three S/T Interfaces

  • From 64 to 384kbps. transfer rates

  • Eliminates need for separate termination units

Adtran NT1 T380

Features Include:
  • Terminates ISDN Basic Rate 2-wire U Interface

  • Provides 4-wire S/T Interfaces



       contact us       terms of use/privacy policy       site map